34
If you are using the camera for the first time, read this section.
1
Press the POWER button to turn the
camera on, and turn the mode dial to
5.
2
Put the subject of your photo in the center of the
screen and press the shutter release button
halfway.
• The camera focuses on the subject and the exposure and white
balance are fixed.
• If automatic focusing fails, a red
frame is displayed in the center of the
picture display.
• The focal distance is measured at a
maximum of nine points. Green
frames appear to indicate the
positions that are in focus.
Shooting with Auto Shooting Mode
Turn the mode dial to 5 to shoot with auto shooting mode.
The shutter release button works in two steps. When you press
the shutter release button halfway (Half-press), the auto-focus
function is triggered to determine the focal distance. Next, press it
all the way down (Full-press) to shoot.
When your subject is not in the center of your composition,
compose your photo after focusing. (Focus Lock)
Frame
To Next Page
Loading...
