Ricoh CX2 - Bracket Shooting; Auto Bracketing

112
Shooting Menu
4
Bracket shooting is the function for performing automatic
consecutive shooting while changing the exposure, white balance,
color, or focus position.
Note ----------------------------------------------------------------------------------------------
• This function is not available in dynamic range double-shot mode, easy shooting
mode, and continuous mode.
• Bracket shooting is not available when [Focus] is set to [Multi-trgt AF].
• The flash cannot be used.
• The [Time Exposure] setting is disabled. (GP.117)
• Assigning [AT-BKT], [WB-BKT], [CL-BKT], or [FOCUS-BKT] to the Fn (Function)
button with [Set Fn Button] (GP.174) allows you to switch between on and off by
pressing the Fn button. (GP.66)
When the auto bracketing function is set to [On], the camera
automatically shoots three consecutive shots at three exposure
levels (-0.5EV, ±0, and +0.5EV) based on the set exposure level.
1 Display the shooting menu.
• For information on using the menu, see P.100.
2 Press the ADJ./OK button " to
select [Auto Bracket] and
press the button $.
3 Press the button !" to select
[On].
4 Press the ADJ./OK button.
• The symbol appears on the screen.
Bracket Shooting
Auto Bracketing