196
Setup Menu
7
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera. (GP.163)
Your camera is set to NTSC video format (used in North America
and other countries/regions) for use with television equipment and
other audiovisual equipment. If the equipment you want to connect
to uses PAL format (used in Europe and elsewhere), then switch
your camera to PAL format before connecting.
The default setting varies depending on where you purchased the
camera.
1
Display the setup menu.
• For the operating procedure, see P.166.
2
Press the ADJ./OK button " to
select [Video Out Mode] and
press the button $.
3
Press the button !" to select
the desired setting.
4
Press the ADJ./OK button.
• Once you have set the video format, the display returns to the Setup
menu.
Note ----------------------------------------------------------------------------------------------
This camera is not compatible with SECAM format.
TV Playback Method
Available Settings
NTSC
PAL
To Next Page
Loading...
