Ricoh CX2 User Manual

198
Direct Printing
8
Connect your camera to a printer using the USB cable provided.
1 Make sure that the camera is off.
2 Connect your camera to a
printer using the USB cable
provided.
• Your camera turns on automatically.
• Turn on the printer if it is not already on.
Note ----------------------------------------------------------------------------------------------
To disconnect the camera from the printer, check that the camera is turned off after
printing is finished, and disconnect the USB cable.
Caution------------------------------------------------------------------------------------------
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
Connecting the Camera to a Printer

Ricoh CX2 Specifications

General

Brand	Ricoh
Model	CX2
Category	Digital Camera
Language	English