100
Program
You can save the number of prints & sets / memory name / function settings / batch print &
sequential batch print in advance. And you can retrieve the saved settings and perform master
making and printing.
Also, you can change and confi rm the settings when needed.
This mode enters the number of prints & sets in the memory, and changes memory name and
sets function settings, batch print and sequential batch print when needed, and then saves them.
These settings are not cleared even after the power has been turned off.
● Memory
There are nine memories (MEMORY 1 - 9) in total.
Up to 90 sets of specifi ed number of prints & sets can be collectively set.
● Changing Memory Name
Memory name of factory setting is MEMORY *. Change memory name when needed.
● Function Settings
The following settings can be saved:
Print speed, print position, paper size, zoom ratio, image mode, print darkness, multiple
exposure, book shadow erasure, 90° rotation, 180° rotation, document size, ink saving mode,
and shortcut setting
Make sure that the main screen is displayed on the
touch panel LCD.
Touch “PROPERTY”.
Special Function: Program
To Next Page
Loading...
