Ricoh DD 5450 - Basic Printing; Printing Using Basic Functions

22
● When the power is already turned on, press the
RESET key. If the last-entered setting remains,
press the
RESET key. The setting returns to
Standard Mode.
Make sure that the main screen is displayed on the
touch panel LCD.
Basic Printing
Printing Using Basic Functions
Set functions.
REFERENCE
RESET key
(“Preparing for Printing” → see p.14)
(“Loading Documents” → see p.19)
(“How to Set the Print Tray” → see p.17)
(“How to Set the Jump Plates” → see p.18)
(“Turning Power ON/OFF” → see p.8)
Press the power switch on the control panel.
Load paper.
Load the document.
Set the “print tray”.
Set the jump plates.
Power switch