Ricoh DD 5450 - How to Set the Jump Plates

18
Preparing for Printing
How to Set the Jump Plates
The following describes how to set the jump plates.
Hold the “ jump plate levers” and adjust the jump
plates according to the paper size.
REFERENCE
● When moving the “jump plate levers” from the A3/
B4/A4 position, move them while holding them up.
● When you use extremely heavy weight paper, set
the “jump plate levers” outward.
● When you use wider paper than 297 mm, set the
“jump plate levers” outward.
● When you use narrower paper than 210 mm, set
the “jump plate levers” inward.
Inward for narrower paper
than 210 mm
Outward for extremely heavy weight
paper or wider paper than 297 mm