Ricoh DD 5450 - How to Set Multiple Exposure (2, 4, 8, and 16-Up)

58
Edit Function: Multiple Exposure
How to Set Multiple Exposure ( 2, 4, 8, and 16-up)
Touch “PROPERTY”.
Touch “EDIT”.
Touch “MULTIPLE EXPOSURE”.
A list of multiple exposure appears.
Touch your preferred multiple exposure (2, 4, 8, or 16-up).
“2” is selected here.
Touch “END”.
REFERENCE
Make sure that the main screen is displayed on the
touch panel LCD.
REFERENCE
To set MULTIPLE EXPOSURE to “OFF” (standard):
● Touch “MULTIPLE EXPOSURE” and then touch “OFF”.
● Press the
RESET key.
In this case, all settings will be returned to Standard
Mode.
When “MULTIPLE EXPOSURE” is set, the “MULTIPLE
EXPOSURE” icon appears at the bottom of the
main screen. When you touch the icon, the setting
screen of “MULTIPLE EXPOSURE” appears and
you can change the setting. However, if maximum
shortcut icons are already displayed, the “MULTIPLE
EXPOSURE” icon will not appear.