Ricoh DD 5450 - How to Set the Print Tray

17
2
2
Basic Operations
Preparing for Printing
Unlock the print tray lock lever and open out the
“print tray”.
Open out the “ side fences”.
Open out the “ paper stopper”.
Hold the “knobs” on the “side fences” and adjust the
position according to the paper size.
Adjust the “SET LINE” according to the paper size.
Hold the “knobs” on the “paper stopper” and adjust
the position according to the paper size.
Adjust the “SET LINE” according to the paper size.
How to Set the Print Tray
The following describes how to set the print tray.
SET LINE
SET
LI NE