Ricoh DD 5450 - How to Supply or Replace Paper While Printing

16
Preparing for Printing
How to Supply or Replace Paper While Printing
If paper runs out during printing or when you replace paper, press the “feed tray descend
switch” to lower the “ feed tray”.
Make sure that the machine stops.
If printing is in progress, press the
STOP key.
Press the “ feed tray descend switch”.
The “feed tray” is lowered for the time that the “feed
tray descend switch” is pressed.
When paper runs out or papers in the feed tray are
removed, the feed tray is automatically lowered.
Follow the steps 2,3, and 4 in “How to Set Papers”
IMPORTANT
REFERENCE
(“How to Set Papers” → see p.14)
● When supplying different size paper, set the
“side fences” and “paper stopper” again.
● When supplying different quality paper, adjust
the “feed pressure adjuster lever”, “Separation
pressure adjuster knob”, and “side separator
height adjuster knob”.