Ricoh DD 5450 - Loading Documents

19
2
Basic Operations
Loading Documents
How to Load Document
The document can be loaded in the “portrait” or landscape” position.
Gently open the “ exposure glass cover”.
Place the “document face down” on the exposure
glass, aligned with the guide (scale).
When you load a non standard-size document,
place it with the center of the document aligned with
the arrow on the guide ( scale).
Gently close the “exposure glass cover”.
How to Load Document on the Exposure Glass
● Landscape (Lateral) Placement
(to paper feed direction)
Document
Scale
Arrow
IMPORTANT
IMPORTANT
REFERENCE
● Portrait (Vertical) Placement
(to paper feed direction)
down
● A4, B5, and A5-size documents can be loaded in the “portrait” or landscape” position.
● Use the portrait position when enlarging or reducing from standard-size documents to
standard-size paper, such as A4 to A3.
● A3 and B4 documents can only be loaded in the portrait position.
Printing face
● When you place a thick document such as a
book on the exposure glass, take care not to
force the exposure glass cover as this may
damage the exposure glass with a risk of
personal injury.
● Turn the power switch ON before placing
a document. If not, the machine cannot
recognize the document size correctly.
● If the document is not aligned with the center
of the guide (scale), a message is displayed
on the touch panel LCD. Set the document
again.