126
Special Function: Batch Print / Sequential Batch Print
How to Enter Batch Print / Sequential Batch Print
Touch “number of prints” icon.
Enter the number of prints using the NUMERIC keys.
Press the
×
＝
key.
The number of prints is set.
Enter the number of sets using the NUMERIC keys.
Press the
×
＝
key.
The number of sets is set.
Repeat steps 3 to 6.
Up to 90 sets can be entered.
Touch “OK”.
Press the
MASTER MAKING key.
Printing starts from the last-entered set.
● Printing starts from the last-entered prints and
sets.
● The MASTER MAKING key will not
function until all the sets have been printed.
● If you want to stop the print run, press the
STOP key and then press the CLEAR key.
● You can also change the setting of batch print/
sequential batch print on the “ENTER PRINTS/
SETS” screen.
● If you make a mistake, touch the mistaken
value and enter value again using the
NUMERIC keys.
IMPORTANT
Make sure that the main screen is displayed on the
touch panel LCD.
To Next Page
Loading...
