30
Print Speed Adjustment
Touch “TOP SPEED”.
A message appears on the touch panel LCD.
If you select “YES”, use the paper according to the
restrictions below. If the paper to be used does not
meet the restrictions, select “NO”.
When TOP SPEED is valid, the speed lamp blinks at the position of speed 5.
How to Set TOP SPEED
● To return to default setting (about 100 pages per minute):
● Press the LOW or HIGH key repeatedly until the speed lamp moves to the center.
● After pressing the
STOP key, press the RESET key. In this case, all settings
are reset to standard mode.
However, when default settings have been changed in Initial Confi guration setting, the
print speed is the currently set print speed.
REFERENCE
IMPORTANT
RESTRICTIONS in TOP SPEED
● Use size B4 or smaller.
● Paper stacking performance may deteriorate
when using thin paper.
● Print position performance may deteriorate
slightly.
● Some paper may cause wrinkles.
To Next Page
Loading...
