128
Document Misset Detection
Touch “PROPERTY”.
Touch “SPECIAL”.
How to Set Document Misset Detection
Special Function: Document Misset Detection
IMPORTANT
Make sure that the main screen is displayed on the
touch panel LCD.
Touch the screen switch button at the bottom of the
screen.
When scanning the document, if no document is placed
on the exposure glass or the document is not placed
correctly, this function warns you about it.
(“How to Load Document on the Exposure Glass” → see p.19)
● If the corner of the document is folded, it may be
detected.
● If detection is wrong, set “DOC. MISSET. DETEC.”
(document misset detection) to “OFF”.
To Next Page
Loading...
Need help?
General
