Ricoh DD 5450 - When Master Setting Error Has Occurred; How to Remove the Master

192
When Master Setting Error Has Occurred
Press the “ scanner button” to slide the scanner unit.
Remove the “master” remained in the feed
section.
Set a master again.
(“How to Set the Master Roll” → see p.193)
Slide the “scanner unit” to return it to its original
position.
Make another master.
The message “MASTER SETTING ERROR” is displayed on the touch panel LCD.
Follow the procedure below to remove the master jammed in the feed section, and try master
making again.
How to Remove the Master
Master cover
Remove the master
Master cover open lever