10
Document/Printing Paper Specifi cations
Acceptable Documents
Acceptable Printing Paper
● The following types of document cannot be used :
* Documents with large fi le-binding holes
* Documents with staples or paper clips attached
* Documents with markedly curling ends/sides, or marked folds
* Documents with tears or rough edge
* Chemically treated documents with such as thermal paper and carbon paper, etc.
* Highly transparent documents such as OHP fi lm and tracing paper, etc.
* Documents which surface is slippery such as art paper and coated paper, etc.
* Documents with correction fl uid and glue, etc.
* Documents with smaller pieces of glued paper
● Always use documents of the same size. If you load documents in different length, the
printer may not operate correctly.
● Acceptable printing paper and capacity on the feed tray and print tray
Paper weight : 45–210 gsm (12 lb Bond–110 lb Index)
Paper size : 320×450 mm (max.)
100×150 mm (min.)
Paper stacking capacity : Feed tray : 1,500 sheets (64 gsm), 1,280 sheets (20 lb Bond)
1,200 sheets (80 gsm)
Print tray : 1,500 sheets (64 gsm), 1,280 sheets (20 lb Bond)
1,200 sheets (80 gsm)
* 1500 sheets may not be loaded depending on paper condition such as paper type, etc.
* Recycled paper of 100% recycled pulp with different basis weight can be used.
* Some types of envelope cannot be used.
● Exposure glass
Documents and books not exceeding 10 kg
Document Size: 297×432 mm (max.)
● Automatic document feeder (ADF) (optional)
Document weight: 64–28 gsm
Document size : 297×432 mm (max.)
100×148 mm (min.)
Stacking capacity in document tray: 100 sheets (64 gsm), 85 sheets (80 gsm/20 lb Bond)
IMPORTANT
To Next Page
Loading...
