183
6
Troubleshooting
Supplying Paper While Printing
Align the stack to be added and place it on top of
the existing stack. Press the stack lightly toward the
machine.
Press the
PRINT key. The “feed tray” will rise
automatically and printing will resume.
When you press the
STOP key, printing stops.
If the machine is printing, press the STOP key.
Printing stops.
Press the “ feed tray descend switch” continuously.
Release it when the feed tray reaches the proper
height. The feed tray will stop.
● If the sheet is still in the paper feed roller,
pull it out
.
Remove paper from the “feed tray”.
The “feed tray” will automatically descend.
Hold the “side guide lever” and adjust the “side
guide” according to the size of paper to be loaded.
Set paper in different size.
Tak e out pap er s
Side guide lever
Changing Paper Size
Continue Page....
IMPORTANT
Paper feed roller
REFERENCE
Feed tray
descend switch
To Next Page
Loading...
