Ricoh DD 5450 - In 1; How to Set 2 in 1

60
Edit Function: Multiple Exposure
How to Set 2 IN 1
Touch “PROPERTY”.
Touch “EDIT”.
Touch “MULTIPLE EXPOSURE”.
A list of multiple exposure appears.
Touch the screen switch button at the bottom of the
screen.
Touch “2 IN1”.
Make sure that the main screen is displayed on the
touch panel LCD.
To set 2 IN 1 to “OFF” (standard):
● Touch “MULTIPLE EXPOSURE” and then touch “OFF”.
● Press the
RESET key.
In this case, all settings will be returned to Standard
Mode.
REFERENCE