Ricoh DD 5450 - Master Darkness; How to Adjust Master Darkness

41
3
Printing with Useful Functions
Adjusting Darkness
How to Adjust Master Darkness
Touch “DARKNESS”.
Touch “DARK” if the color of the document is light.
Touch “LIGHT” if the color of the document is dark.
Touch “OK”.
Master darkness adjusted in step 3 is set.
● To reset to standard:
* Touch “DARKNESS” again and adjust master darkness to “±0”, and then touch “OK”.
* Press the
RESET key.
In this case, all settings are reset to Standard Mode.
Master Darkness
REFERENCE
Make sure that the main screen is displayed on the
touch panel LCD.
IMPORTANT
Master darkness can be adjusted in 5 steps.
When the color of the document is light, touch “DARK”.
When the color of the document is dark, touch “LIGHT”.
● Set master darkness before starting master making.