8
Turning Power ON/OFF
Press the power switch on the control panel.
Warm-up starts.
The printer is ready when the main screen appears
on the touch panel LCD.
“Standard Mode” is set for each function.
(“Standard Mode” → see p.9)
Turning Power ON
Turning Power OFF
Outlet
Male plug of
the power
supply cord
The following describes how to turn the power ON and OFF.
Connect the “female plug” of the power cord to the
“inlet”.
Connect the “male plug” of the power cord to the
“outlet”.
Press the power switch on the control panel.
The printer is turned off and the power switch light
goes out.
● Insert the power cord plug fi rmly into the
socket, so that proper electrical contact
is effected. If grounding is imperfect and
electrical leakage occurs, fi re or electric
shock could result.
CAUTION
To Next Page
Loading...
