145
4
Other Functions
Optimize Print
This function is for adjusting print darkness and speed according to room temperature to set
the best fi nish for the printed mode. You can set temperature from 0 to 35 degree (C) and print
speed from 1 to 5.
Default setting is “OFF”.
● Set temperature close to room temperature.
● When “OPTIMIZE PRINT” is set to “ON”, print darkness switches to “MANUAL” by turning on
the power or pressing the
RESET key even when “DARKNESS” in Initial Confi guration is
“AUTO”.
● Print darkness setting varies depending on the set temperature.
How to Set Optimize Print
Touch “SETTINGS”.
Touch the screen switch button at the bottom of the
screen.
Setting Function: Optimize Print
IMPORTANT
Touch “PROPERTY”.
Make sure that the main screen is displayed on the
touch panel LCD.
Continue Page....
To Next Page
Loading...
