63
4
Other Functions
Edit Function: Multiple Exposure
How to Set 2 IN 1 Using the ADF (Option)
REFERENCE
Proceed with steps 1 to 8 of the sequence described
in “How to Set 2 IN 1”.
(“How to Set 2 IN 1” → see p.60)
Select document orientation, binding direction, and “2
IN 1” orientation, and then touch the screen.
Upper left is selected here.
PLACEMENT appears.
Set the document according to the displayed
placement.
(“Loading Document in Automatic Document Feeder
(ADF)(Optional)” → see p.20)
Touch “OK”.
Touch “END”.
When “2 IN 1” is set, the “2 IN 1” icon appears at the
bottom of the main screen. When you touch the icon,
the setting screen of “2 IN 1” appears and you can
change the setting. However, if maximum shortcut
icons are already displayed, the “2 IN 1” icon will not
appear.
Press the MASTER MAKING key.
After the fi rst document is scanned by the ADF, the
second document is scanned automatically, and then
printing stars.
To Next Page
Loading...
