23
2
2
Basic Operations
Basic Printing
Press the MASTER MAKING key.
When the master has been made, one test print is
automatically made.
You can enter the number of desired prints
before pressing the
MASTER MAKING key to
immediately print the required number of copies.
REFERENCE
Use the NUMERIC keys to enter the “number of
prints”.
Check the printing fi nish such as print position and
print darkness, etc.
Press the PRINT key.
The print run starts and the count displayed on the
touch panel LCD is decremented by one for each
print made. The printed pages are output to the “print
tray”.
REFERENCE
REFERENCE
IMPORTANT
● The test print is for verifi cation purposes only
and may be fainter than the fi nal print.
● You can specify up to 9999 prints.
● If you want to change the “number of prints”,
press the CLEAR key and then enter the correct
number.
● When you want to stop a print run, press the
STOP key. To restart the print run, press the
PRINT key again.
When you want to print multiple documents, repeat
step 3 to 11.
To Next Page
Loading...
