107
4
Other Functions
Special Function: Program
● Modifying Number of Prints & Sets, Multiplying Number of Sets by 2 - 5
Touch “MODIFY”.
Touch “INDIVIDUAL MODIFY”.
● Touch the screen switch button at the bottom of the
screen. The next screen appears.
● If you touch “ALL CLEAR”, the number of prints and
sets are cleared.
● When you perform sequential batch print, touch
“BATCH” and then touch “SEQUENTIAL BATCH
PRINT”.
● When you multiply the number of sets, touch
“SET x *”. (*: 2, 3, 4 and 5)
● If the number of prints is 0, the number of sets
remains 1. When multiplied number of sets is over
99, the number of sets will be 99.
REFERENCE
Saved numbers of prints and sets appear.
Touch the icon you want to modify and enter values
using the NUMERIC keys.
Continue Page....
To Next Page
Loading...
