190
When "MASTER EJECTION ERROR" is Displayed
Lift up the “drum stopper” and turn the drum by
hand to set the “Lever” in step 5 to an easily
operable position.
Push down the “lever”.
The “master clamp” opens and the edge of the
master will be released from the clamp. If the
master is stuck, release it by hand.
Return the “lever” to its original position, and turn
the drum by hand to remove the “master”.
Continue the above steps until the “master” is
removed completely.
Turn the “drum” by hand until the “drum stopper”
fi ts into the groove.
Make sure that the peeled paper does not stick
to your clothing.
IMPORTANT
To Next Page
Loading...
