33
3
Printing with Useful Functions
Enlargement / Reduction
● To reset to 100%:
* Touch “ZOOM” and then touch “100%”.
* Press the
RESET key.
In this case, all settings are reset to Standard Mode.
● Always set the sizes of printing paper and
document to be used.
You cannot obtain the correct zoom ratio if
you set wrong size.
● The machine cannot detect the size
correctly if the document is positioned as
shown on the right.
Scale
* Edge of paper not touching scale
* Document not positioned centrally
against the scale.
Document
IMPORTANT
REFERENCE
* Place document centrally positioned
against the scale.
Correct
Incorrect
Incorrect
Document
Document
To Next Page
Loading...
