54
Edit Function: Preview
● Using ZOOM Function
Touch “ZOOM”.
Touch one from the list (ZOOM1/ZOOM2/ZOOM3/
ZOOM4).
The following description is when “ZOOM2” is
touched.
Touch the center of the area you want to zoom in.
The area you touched is zoomed in.
To change “ZOOM2” to “ZOOM1”, “ZOOM3”, or
“ZOOM4”, touch “ZOOM”.
● To confi rm the zoomed-in peripheral area of the
document by ZOOM function, touch “SHIFT”, then
touch anywhere on the image and move the touched
position to the area you want to view while touching
it. If “ZOOM1” is selected, you can not use shift
function.
You can zoom in the image by touching a part of the document.
ZOOM1 < ZOOM2 < ZOOM3 < ZOOM4
ZOOM1 Displays whole document on the touch panel LCD.
ZOOM2 Displays the zoomed-in peripheral area of the touched position.
Double zoom of ZOOM1
ZOOM3 Displays the zoomed-in peripheral area of the touched position.
Quadruple zoom of ZOOM1
ZOOM4 Displays the zoomed-in peripheral area of the touched position.
Octuple zoom of ZOOM1
REFERENCE
To Next Page
Loading...
