72
Edit Function: Book Shadow Erasure
Touch “END”.
REFERENCE
When “SHADOW ERASURE” is set, the “SHADOW
ERASURE” icon appears at the bottom of the main
screen. When you touch the icon, the setting screen of
“SHADOW ERASURE” appears and you can change
the setting. However, if maximum shortcut icons are
already displayed, the “SHADOW ERASURE” icon will
not appear.
Specify the sizes for “A”, “B”, and “C”, and then touch
“OK”.
Touch “A” and specify numeric value using the “+” or
“-”.
Touching “+” widens shadow erasure area.
Touching “-” narrows shadow erasure area.
The value can be also entered using the NUMERIC
keys.
Specify the sizes for “B” and “C” in the same
procedure.
You can set the sizes from 0 to 99mm.
REFERENCE
To Next Page
Loading...
