81
4
Other Functions
Edit Function: Edit Image
Touch the area mode to be set.
The following description is when “BOX” is touched.
● Select the area mode from BOX/POLYGON/PEN 1/
PEN 2/PEN 3/PEN 4.
If you select “BLINK” beforehand, the specifi ed area
blinks when it is fi xed. If you want to cancel blinking
in the specifi ed area, touch “AREA” and then touch
“LIGHT”.
● When “BOX” or “POLYGON” is selected and you want
to change the area mode, touch “MENU”.
Specify the area.
1 Touch the start point of the area you want to specify.
2 Move your fi nger while touching it to move the area.
3 Release your fi nger from the screen to fi x the
specifi ed area.
* If you want to change the area, repeat the above
steps 1 to 3 .
4 Touch “OK”.
REFERENCE
Continue Page....
5 Touch “INSIDE” or “OUTSIDE”.
“INSIDE” is touched here.
If you touch “OUTSIDE”, the outside of the specifi ed
area is edited in the current mode.
(“● Using AREA Function” → see p.86)
To Next Page
Loading...
