30 November, 1999 SERVICE RAM ADDRESSES
4-51
Service
Tables
8000A8(H) - User parameter switch 08
Bits 0 and 1: Not used
Bits 2 and 3: Authorized reception
Bit 3 2 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this
feature are accepted.
1 1 Faxes from senders whose RTIs/CSIs are not specified for
this feature are accepted.
Bits 4 and 5: Specified cassette selection (optional cassette required)
Bit 5 4 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this
feature are printed to the paper in a specified cassette.
1 1 Faxes from senders whose RTIs/CSIs are not specified for
this feature are printed to the paper in a specified cassette.
Bits 6 and 7: Forwarding (optional memory card required)
Bit 7 6 Setting
X 0 Disabled
0 1 Faxes from senders whose RTIs/CSIs are specified for this
feature are forwarded.
1 1 Faxes from senders whose RTIs/CSIs are not specified for
this feature are forwarded.
8000A9(H) - User parameter switch 09
Not used
8000AA(H) - User parameter switch 10
Bit 0: Reverse order printing 0: Disabled, 1: Enabled
Bits 1 to 6: Not used
Bit 7: Halftone type 0: Error diffusion, 1: Dither
8000AB(H) - User parameter switch 11
Bits 0 and 1: Not used
Bit 2: Detect blank sheet 0: Disabled, 1: Enabled
Bits 3 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station
0: Off, 1: On
Bit 7: Not used
8000AC(H) - User parameter switch 12
Bit 0: Not used
Bit 1: Distinctive ring detection (USA only) 0: Disabled, 1: Enabled
Bits 2 to 7: Not used
To Next Page
Loading...
