1. Measure the vertical (Y) and horizontal (X) lengths of the original.
2. Press [Copy] on the Home screen.
3. Place the original.
page107”Basic Procedure for Copying Documents”
For details about the sizes of originals that you can place, see the following section:
page301”Recommended Original Size and Weight”
4. Press [Original Size].
If the key is not displayed, select it from [Original Setting/Store File].
5. Press [Custom Size].
6. Enter the values of X and Y that you measured in Step 1, and then proceed to the
next screen.
7. Check that the orientation of the original is specified correctly, and then press [OK].
8. Press the paper tray select key and select the paper to use as necessary.
To Next Page
Loading...
