When "Generic PostScript Printer" is displayed even though the IP
address is correct
Check the network connection of the machine and the computer, and then
register again.
• When the machine is connected to a wired LAN.
Check that the cable is connected to the machine correctly.
5. Click [Add].
The progress screen is displayed.
• If the progress screen does not close after a while, click [Configure...] and
configure the option configuration of the printer. For the procedure of the option
configuration, see page424”Specifying the Option Configuration of the Machine
to the Printer Driver (Network Connection)”.
6. Check that the machine name is added to the [Printers & Scanners] screen.
7. Close the system preferences screen.
Specifying the Option Configuration of the Machine to the Printer Driver
(Network Connection)
If the option configuration of the machine is not automatically reflected, select the
option installed on the machine in [Printers & Scanners].
To Next Page
Loading...
