1. Select [System Preferences...] from the Apple menu.
2. Click [Printers & Scanners].
3. Select the machine from the list, and then click [Options & Supplies...].
4. Click [Options], select the option installed on the machine, and then click [OK].
• If the usable options are not displayed, the IP address has not been entered
correctly or the PPD file has not been registered properly. To enter the IP
address or register the PPD file, see page423”Registering the Machine in
[Printers & Scanners]”.
5. Close the system preferences screen.
• If the option you want to select is not displayed, PPD files may not be set up
correctly. To complete the setup, check the name of the PPD file displayed in the
dialog box.
• Setting procedures using macOS 12.2 are shown as an example. The actual
procedure may differ depending on the OS version you are using.
• To specify an optional Adobe PostScript when using a PostScript 3 printer driver,
select [Adobe PostScript] in the "PostScript:" list on the [Options] tab.
To Next Page
Loading...
