Ricoh IM C5510A - Registering Settings as a Program

1. Introduction and Basic Operations
66
1
Registering Settings as a Program
First, configure the settings to be registered on the Copy, Fax, Scanner, or Document
Server screen, and then register them.
1. On the Home screen, press [Copy], [Fax], [Scanner] or [Document Server].
If the icon is not displayed on the Home screen, add the icon from the application
list screen.
page62”Adding a Frequently Used Application or Widget to the Home Screen”
2. Specify scan and output settings to be registered as a program.
When using the Document Server, specify the settings on the [Print Settings] screen.
To display the [Print Settings] screen, select the document to print on the [Print File]
screen, and then press [Print Settings].
3. Press [Menu] ( ).
4. Press [Set Current Settings to Program].
5. Press a program number to register the settings.
6. Enter a program name and select an icon.
7. Press [OK].
If you selected [Document Server] in Step 1, proceed to Step 9 after pressing [OK].