1. Press [Watch Video].
Press [Check Status] and then press [Check] under [Machine Status] tab.
2. Press the play ( ) key.
3. Replace the toner by following the procedure shown in the video.
• You can transmit data in the fax or scanner function even after the toner runs out.
However, you cannot transmit a fax when the number of times of reception and
transmission performed in the fax function after the toner has run out and the
number of times of communication not recorded in the Records exceeds a total of
1,000. Replace the toner earlier.
• While the message prompting you to replace the toner is displayed, Memory Storage
Report for Memory Transmission will not be printed.
• If appears when there is a lot of toner, hold the cartridge with the opening
upward, shake it well, and then reinstall it.
Precautions When Storing Toner
• Do not store toner (new or used) or toner containers while toner is inside in a
place with an open flame. The toner can ignite and result in burns or fire.
• Do not leave the following items in a place where children can reach them:
• Toner (new or used)
• Toner containers while toner is inside
• Toner-attached parts
To Next Page
Loading...
