2. Specify the Document Size, Paper Type, Input Tray, and other settings.
You can configure the basic settings just by using the [Basic] tab.
• Job Type: Select [Normal Print] to execute printing immediately.
You can make a partial print as a test and proceed to print the rest of the
document (Sample Print).
See "Making a Partial Print as a Test and Printing the Rest of the Document",
User Guide (HTML).
You can store documents in the machine (Locked Print, Hold Print, or Stored
Print).
See "Storing Documents to Print in the Machine", User Guide (HTML).
• Document Size: Select the size of the document to print.
• Print On: Select the size of the paper to print on.
To Next Page
Loading...
