"Network
communication has
failed. Cannot
access the SIP
server. Please
check the address
setting of the SIP
server or the SIP
server settings."
[13-18]
The SIP server
could not be
accessed.
Specify the correct "SIP Server IP
Address" in [Settings] [Fax Settings]
[Detailed Initial Settings] [IP-Fax
Settings] [SIP Settings].
See "Sending Documents by IP-Fax", User
Guide (HTML).
"Network
communication has
failed. Cannot
connect to the
destination
normally because
there is no IP-FAX
function
compatibility
between the
destination and this
machine."
[13-33]
The destination
device is unable to
connect with the
IP-Fax function of
the machine.
Sending a fax using the IP-Fax function is
not possible. Send the fax using the G3
line if possible.
"Network
communication has
failed. Cannot
register this
machine to SIP
server. Please
check the address
setting of the SIP
server or other
settings of the SIP
server."
[13-17]
The SIP server
rejected the
registration of the
user name.
Specify the correct "SIP Server IP
Address" and "SIP User Name" in
[Settings] [Fax Settings] [Detailed
Initial Settings] [IP-Fax Settings]
[SIP Settings].
See "Sending Documents by IP-Fax", User
Guide (HTML).
The POP3 (IMAP4)
server could not be
found.
Check the settings in [Reception
Protocol], [POP3/IMAP4 Settings] and
[Email Communication Port] on [Settings]
[System Settings] [Send
(Email/Folder)] [Email].
To Next Page
Loading...
