"Staple error
occurred. The job
has been
cancelled."
The number of
sheets that can be
stapled was
exceeded, and
printing was
canceled.
Check the number of sheets that can be
stabled on the finisher in use.
page308”List of Specifications”
"Staple has been
cancelled."
The staple function
was canceled
because the
number of sheets
exceeds the
maximum that can
be stapled or the
staple position is
specified
incorrectly.
Check the specification of the finisher in
use, and specify the setting accordingly.
• Number of sheets that can be stapled
together
page308”List of Specifications”
• Staple position that can be specified
on different paper orientation and
print data orientation
See "Stapling Printed Pages", User
Guide (HTML).
Certain settings can produce staple
results that might not be as expected
when the paper is delivered to the output
tray.
A malfunction
occurred
temporarily on the
machine.
Turn off the power of the machine, wait
for 10 seconds or more after confirming
that the main power indicator is turned
off, and then turn on the power.
page19”Turning On and Off the Power”
"The job was
cancelled because
the specified
settings are not
applicable for
Booklet."
A condition in which
binding cannot be
performed was
specified, and
printing was
canceled.
Check the binding condition.
"The print job has
been cancelled
because capture
file(s) could not be
stored: Exceeded
max. memory."
The amount of
available space on
the internal storage
became low while
saving the capture
data.
• Reduce the size of the document to
send.
• Erase documents that are no longer
needed.
See "Deleting Documents Stored in
the Machine", User Guide (HTML).
To Next Page
Loading...
