Ricoh JP5800 - Page 82

1 March, 2000 SERVICE PROGRAM MODE
4-15
Service
Tables
4. Using the
number keys
, enter the desired
Sub Menu Number
(listed in the
service program table), then press the
OK
key on the bottom of the LCD (or the
Enter (#)
key).
NOTE:
The sub menu number can be shifted up or down by pressing the
Prev.
or
Next
key [A] on the bottom of the LCD.
5. Some sub menu items (but not all of them) have menus below them. Using the
Prev.
or
Next
key [A] on the bottom of the LCD, select the desired menu item.
NOTE:
These menus are not accessible by entering the number with the
number keys.
6. Follow the "Change Adjustment Values or Modes" procedure below.
NOTE:
To cancel the SP mode, press the
Clear Modes key
or the
Return
(or
End
) key on the bottom of the LCD.
Change Adjustment Values or Modes
1. After entering the desired SP mode, pressing the
OK
key on the bottom of the
LCD (or the
Enter (#)
key). The current value or mode will be displayed on the
LCD (at the end of the second line).
2. Enter the desired value or mode using the
number keys
(listed in the service
program table).
NOTE:
Use the
"
key to toggle between + and -.
3. Press the
OK
key to store the desired value or mode.
4. To cancel the SP mode, press the
Clear Modes key
or the
Return
(or
End
)
key on the bottom of the LCD.