1 March, 2000 SERVICE PROGRAM MODE
4-27
Service
Tables
Notes
1: 2-011 (Display language)
0: Japanese, 1: English, 2: German, 3: French, 4: Italian, 5: Spanish, 6: Dutch
2: 2-015 (Machine Destination)
Always set this mode as ‘Other.’ If ‘Japan’ is selected, User Tools 1-5 that are not
used for other versions are displayed.
3: 2-016 (Swap Start Key)
Enables swapping
the Start (master making) key function
and
the Print key function
depending on the end user’s preference. (‘No’ is the default setting.)
4: 2-020-1 (Default original mode)
0: Letter, 1: Letter/Photo, 2: Photo, 3: Pencil
5: 2-020-3 (Default paper type)
0: Special, 1: Standard, 2: Thick, 3: User 1, 4: User 2
6: 2-020-4 (Default master density)
0: Pale, 1: Normal, 2: Fairly dark, 3: Dark
7: 2-020-5 (Default print speed, cpm)
1: 60, 2: 75, 3: 90, 4: 105, 5: 120
8: 2-020-9 (Default Photo/Lightness)
This is the default brightness in photo or letter/photo mode.
0: Dark, 1: Normal, 2: Light
9: 2-020-10 (Default Photo/Screen)
This is the default screen type for photo mode.
0: Standard, 1: Coarse 1, 2: Coarse 2, 3: Coarse 3, 4: Coarse 4 (coarsest)
10: 2-020-11 (Default On Line paper size)
This is the default paper size when the On Line key is pressed,
0: A3, 1: B4, 2: A4, 3: A4 lengthwise, 4: B5, 5: B5 lengthwise, 6: A5,
7: A5 lengthwise, 8: A6, 9: A6 lengthwise, 10 to 12: Not used, 13: Free, 14: Auto
Free – The master size is determined by the paper size sent from the PC.
Auto – The master size is determined by the paper size on the paper feed table. If
the data from the PC is for a larger paper size, the excess data is lost.
Other settings: For example, if the setting is 0 (A3), the machine always makes an
A3 master.
11: 2-020-12 to -15 (Default make-up patterns 1 to 4)
0 to 39: Preset patterns, from 1 to 40
40 to 43: User-created patterns A to D
To Next Page
Loading...
