Ricoh MP 2510 - Changing the Stamp Position, Size and Density

Copier Functions
87
2
A Press [Edit / Stamp].
B Press [Stamp].
C Press [Preset Stamp].
D Select the desired message.
You can change the position, size, and density of the stamp.
E Press [All Pages] or [1st Page Only] to select the print page.
F After you specify all desired settings, press [OK].
G Press [OK] twice.
H Place the originals, and then press the {Start} key.
Reference
“Stamp”, General Settings Guide
Changing the stamp position, size and density
Changes the stamp position, size and density.
A Press [Change].
B Select the position for print, size, and density, and then press [OK].