Ricoh MP 2510 - To Specify a Ratio with [O] and [N]

Copier Functions
51
2
E Enter the desired ratio with the number keys, and then press [q].
F Press [Vertical].
G Enter the desired ratio with the number keys, and then press [q].
H Press [OK] twice.
I Place the originals, and then press the {Start} key.
To specify a ratio with [o] and [n]
Select a ratio using [o] or [n].
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Press [Direct. Mag.%].
D Press [With no].
E Press [Horizontal].
F Specify the desired ratio using [n] or [o].
Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and hold-
ing down the relevant key changes the ratio in increments of 10%.
G Press [Vertical].
H Specify the desired ratio using [n] or [o].
I Press [OK] twice.
J Place the originals, and then press the {Start} key.
Note
❒ If you have incorrectly entered the ratio in steps
F
or
H
, readjust it with [n]
or [o].