Ricoh MP 2510 - User Tools Menu (Copier and Document Server Features)

4
User Tools Menu (Copier and Document
Server Features)
This section describes items that can be specified on the copier initial screen.
Copier initial screen can be displayed by pressing the {User Tools/Counter} key.
For more information about how to set up these items, see General Settings
Guide.
❖ General Features
Item Description
Auto Paper Select Priority Auto Paper Select is the default setting. You can cancel this setting.
Auto Tray Switching If you load paper of the same size in two or more trays, the ma-
chine automatically shifts to the other when the first tray runs out
of paper (when Auto Paper Select is selected.) This function is
called “Auto Tray Switching”. This setting specifies whether to use
Auto Tray Switching or not.
Paper Display You can choose to have the available paper trays and sizes shown
on the initial display.
Original Type Priority You can select the original type effective when the power is turned
on, or modes cleared.
Original Type Display You can have the original types shown on the initial display.
Auto Image Density Priority You can set whether Auto Image Density is “On” or “Off” when
the machine is turned on, reset, or modes are cleared.
Copy Quality You can adjust the copy quality level for each original type (Text,
Text/Photo, Photo, Pale, Generation Copy).
Image Density You can adjust the image density level for each original type (Text,
Text/Photo, Photo, Pale, Generation Copy).
Duplex Mode Priority You can select the type of the Duplex function effective when the
power is turned on, or modes cleared.
Copy Orientation in Du-
plex Mode
You can set the copy orientation when making two-sided copies.
Original Orientation in
Duplex Mode
You can set the original orientation when making two-sided copies.
Change Initial Mode You can select standard mode or Program No.10 as the mode effec-
tive when power is turned on, or modes cleared.
Max. Copy Quantity The maximum copy quantity can be set between 1 and 999.
Tone: Original Remains The beeper (key tone) sounds if you forget to remove originals af-
ter copying.
Job End Call You can choose whether or not the beeper sounds when copying is
complete.
Copy Function Key: F1–F5 You can assign frequently used functions to function keys F1 to F5.
Document Server Storage
Key: F1–F5
You can assign frequently used functions to function keys F1 to F5.