Using the Document Server
133
3
When interrupting printing
The following describes the procedure for interrupting printing work.
A Press the {Clear/Stop} key.
B Press [Stop].
Changing number of print copies while printing is in progress
The following procedure explains changing the number of print copies after
printing has started.
Important
❒ This feature is enabled when the sort function is selected in the printing conditions.
A Press the {Clear/Stop} key.
B Press [Change Quantity].
C Enter the number of print copies anew using the number keys.
D Press the {q} key.
E Press [Continue].
Printing will be resumed.
Note
❒ The range of print copies enterable in step
C
depends on the timing of your
pressing the {Clear/Stop} key.
To Next Page
Loading...
