Copying from Paper Tray 2
29
2
When copying onto special paper
When copying onto special paper such as OHP transparencies, thick paper
(postcards, envelopes, etc.), and adhesive label paper, select the type and size of
paper.
Important
❒ If [2 Sided] is selected for copying in [Dup./Combine/Series] (for example [1 Sid-
ed] → [2 Sided]), select [1 Sided] for copying (for example [1 Sided] → [1 Sided]).
❒ Select [Thick Paper] if the paper weight is 105 g/m
2
(28 lb.) or more.
A Select tray 2, and then press the {q} key.
B Select paper type in “Special Paper”.
C Press [OK].
D Place originals, and then press the {Start} key.
Note
❒ The maximum limit for stacking special paper is different to that for plain
paper. See “Loading Paper”, Troubleshooting.
❒ When setting OHP transparencies, thin paper, or adhesive label paper, Sta-
ple, Shift, or Sort functions cannot be used.
Reference
“Loading Paper”, Troubleshooting
To Next Page
Loading...
