Copier Functions
49
2
B Select the paper tray.
C Place the originals, and then press the {Start} key.
Reference
p.10 “Originals not recommended for the Auto Document Feeder (ADF)”
Size Magnification
You can calculate an enlargement or reduction ratio based on the lengths of the
original and copy.
Measure and specify the lengths of the original and copy by comparing “A” with
“a”.
A Press [Reduce / Enlarge].
B Press [Specifd. Ratio].
C Make sure [Size Magnificatn] is highlighted.
D Enter the length of the original with the number keys, and then press [q].
You can enter sizes between 1 to 999 mm (0.1" to 99.9") in 1 mm (0.1") steps.
E Enter the length of the copy with the number keys, and then press [q].
F Press [OK] twice.
G Place the originals, and then press the {Start} key.
ANP059S
To Next Page
Loading...
