Copying
110
2
Reference
“Tray Paper Settings”, General Settings Guide
Chapters
The pages you specify with this function will appear on the front of copy sheets.
Important
❒ Before selecting this function, press [Dup./Combine/Series] and select “1
Sided→2 Sided” or “Combine”.
❒ This function can be used only when you use the Duplex (1 Sided→2 Sided)
or Combine function.
A Press [Cover / Slip Sheet].
B Press [Desig. / Chapter].
C Press [Chapter].
D Press the key to select the chapter number.
To select chapters 11 to 20, press [T11∼20].
E Enter the page location of the first page of the chapter with the number
keys, and then press the {q} key.
Up to 20 chapter locations can be specified.
F To specify another page location, repeat steps
D
to
E
.
G When you finish specifying page location, press [OK] twice.
GCSHOWOJ
To Next Page
Loading...
