Copying
90
2
Changing the user stamp position
Changes the stamp position.
A Press [Change].
B Select the desired position, and then press [OK].
To program the user stamp
This function scans an image that is used as a user stamp.
The range of stamp images for readability is 10–297 mm (0.4"-11.7") high and 10–
432 mm (0.4"-17.0") wide. However, if the value exceeds the maximum value of
the area (5,000 mm
2
, 7.75 inch
2
), it is corrected within the range of the area auto-
matically.
Important
❒ Up to four frequently used images can be stored in memory.
A Make sure that the machine is in Copy mode.
B Press the {User Tools/Counter} key.
ARS019S
To Next Page
Loading...
