Ricoh MP 2510 - To Register or Change a User Name (When no Name Is Registered to the Address Book); To Change a File Name

Using the Document Server
125
3
To register or change a user name (when no name is registered to the Address Book)
The following describes the procedure for registering or changing a user name
to be attached to a stored document.
A Display the Scan Original display.
B Press [User Name].
The User Name entry display appears.
C Enter the user name and then press [OK].
To change a file name
The following describes the procedure for changing a name to be attached to a
stored document.
A Display the Scan Original display.
B Press [File Name].
The Change File Name display appears.
C Press [Delete All] to delete the old file name.
D Enter a new file name, and then press [OK].
Note
❒ In step
C
, pressing [Backspace] allows you to delete up to any desired location.
❒ Up to 20 characters can be entered as a file name. Note that only 16 charac-
ters of each file name appear in the document list.