Copying
58
2
Staple
Individual copy sets can be stapled.
Important
❒ You cannot use the bypass tray with this function.
❖ Original orientation and stapling position
Place originals in the ADF in the orientation in which they can be read nor-
mally. When placing the original on the exposure glass, keep the same orien-
tation, but set the original facing downwards.
When copy paper is identical in size and orientation to the original, the orig-
inal orientations and staple positions are as follows.
❖ 500-sheet finisher
If your machine is equipped with the 500-sheet finisher, the stapling position
is fixed to “Top”.
ARS008S
To Next Page
Loading...
